The factory cooler is good for most circumstances. PS I've used my own chip to load 4.4GHz/2400MHz. Some people have it working well. Go to DRAM timing control and set Rampage tweak mode to 2 (you can try 1 too) and enter the primary timings you wrote down before. check over here
aka bad Browser Google Chrome Antivirus No thanks Other Info I quite enjoy taco's Quote 12 Nov 2013 #8 usasma View Profile View Forum Posts Mr. Here are my PC specs: CPU: AMD FX 8350 4.0Ghz GPU: AMD HD 6870 Motherboard: ASUS M5A97 R2.0 Samsung SSD 128GB and 500GB Wester Digital. solved Stable prime95 small FFT and Memtest but crashes on Prime95 Blend Can't find your answer ? Coolermaster Seidon 120V, 4670k averages 80-85c in Prime95 Blend Test Prime95 Blend Test Prime95 not using all 4gb of ram with blend test Prime95 error with cpu/memory blend test More resources http://www.sevenforums.com/bsod-help-support/273216-bsod-while-running-lare-fft-prime95.html
Before that though I would try lowering VCCSA and VTT a bit until you get unstable and then raise them a couple of notches and save the profile there. (write it After that I finally realized that "all chips ARE really different", so I went to the store and asked for the same chip, and the guys told me that for some Time to sleep now, will check back tomorrow late afternoon.
This is odd I ran it before for 1 hour and it did not pick up any errors. Remember when you run your memory at 2133 or 2400 you are asking your IMC to run overclocked, so you may need that voltage. I'm not sure the demo version will show it, but check out the entry under CPUID. Okay just insert a voltage like 1.3V and set the turbo clock ratio to 40 and boot up if everything runs fine which should be, just increase the multiplier step by
Nodens10-03-2012, 10:02 AMFor 24/7 I wouldn't go with more than 1.4 for Vcore. Hi Karac. I used this video to overclock: http://www.youtube.com/watch?v=WMZoWOpry40 If you go to 5:27 he has 5 options which i dont have ( the ones set to extreme ) why is that? find more Computer Type Laptop System Manufacturer/Model Number Samsung/NP780 OS Win8.1Pro - Finally!!!
Get the answer EXT64Sep 7, 2010, 11:43 AM Also try lowering your ram to the lowest multi to make sure it is not holding you back. I was running Prime95 under large FFT settings and after 10min I got BSOD. I am assuming your windows 7 is 64bit? I have the Knack. ** If I haven't replied in 48 hours, please send me a message.
PSU Why do we ask this for laptops? More about the author But for testing to find stable voltage I think that is OK. couldn't even boot, never ending MB restart with 5A, 01, 03 errors on MB display. Also I recommend for now on to disable the C states & Intel speedstep technology.
Arne Saknussemm10-02-2012, 06:47 AMHey there Gottex....good stuff!:D If I were you I wouldn't bother running prime for hours....just start using the PC as you normally would! http://aurdev.com/bsod-while/bsod-while-pc-was-idle.html If you just installed a motherboard, make sure that all the drivers associated with it are up-to-date, as well as the BIOS, and that all utilities for it are uninstalled. Site Changelog Community Forum Software by IP.Board Sign In Use Facebook Use Twitter Need an account? still old ...124 Ok, I'll lower the LLC and set vcore 1.45 Gottex10-01-2012, 05:48 PMDoesn't work for me :( LLC Medium vcore 1.45 VCCSA and VTT on 1.2 BSOD 124 :D
Thanx mate :) Gottex10-15-2012, 05:05 PMI've got a new kit G.Skill RipjawsZ < F3-17000CL9Q-16GBZH> DDR-III DIMM 16Gb KIT 4*4Gb < PC3-17000> CL9 So the thing is that memtest86+ 5.00b1 gives tons Never did. Negative math is a bit more straightforward.
So far I haven't had any other problem, nor error reports on the Event Viewer. I have the Knack. ** If I haven't replied in 48 hours, please send me a message. Like Arne said, It's ok while troubleshooting, but you should keep working on lowering those voltages if you want to do 24/7. All switches and jumpers where they are supposed to be.
Memory upgraded to 12 gB from 8 gB Graphics Card has switchable - Intel/ATI - Used wrong drivers, now ATI card is inop :( Will have to fix it soon! Internet Speed too slow when I'm waiting for a download to finish Browser Yes, I use this (Firefox mostly, w/IE next most) Antivirus Windows Defender and Windows Firewall Other Info I'm HalloweenWeed10-03-2012, 02:15 PMGottex, do you have a Vreg water block? have a peek at these guys After about 4-5 minutes of prime95 testing would get constant bsod Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation.
I've also checked (and reapplied) the thermal compound, which hasn't changed the temps that I'm getting from stress testing my pc, I'll look at buying an after market cooler and see I experienced one BSOD on starting the large FFT test however. Gottex10-10-2012, 06:00 AMHello guys, Thank you for your advice, gotta see how it goes I'm testing (Prime, LinX and especially surfing the web and gaming) positive offset right now, +0.035 (under Using the site is easy and fun.
Blend test result matter? If this doesn't work try manually setting some voltages: VDIMM maybe a bit higher than rated say 1.55 if kit is 1.5 1.65 if rated 1.6 etc. Sound Card I'm nearly deaf, so this isn't used often Monitor(s) Displays Touchscreen on laptop/32" Toshiba on HDMI (laid the Sharp TV on a mouse and cracked the screen!) Screen Resolution Do you think it was my memory causing the BSOD?
The custom option stresses the memory controller and memory itself more. you will have to increase VCCSA and VTT try 1.25 on both and lower from there to a stable value.... To do this, open up verifier.exe and select "Delete existing settings", click on "Finish" and reboot the system for the changes to take effect. synphulDec 12, 2014, 6:43 PM I wasn't implying that temp is the only thing to test or check for but the two are definitely related.
But if your not overclocking no need to touch that. Devil's Canyon Minotaur (21 items) For Sale: For Sale: Fan Blowout (Corsair, Akasa, Lian Li), BeQuiet PSU, Koolance